Skip to main content

8312 results for 'round note case box bit'

Categories
Brands
bormax-famag , Wera , Felo , Southeast Tool , Incra , Bondhus , Carbide Processors , Whiteside , HTC Tool , Chapman MFG , Klein Tools , Wiha
    Disposing of Carbide Sludge(Page)

    What follows is based on U.S, and Canadian laws. Individual states, provinces, cities, etc. may have their own regulations. We believe that this information will apply in 98% of all cases but we...

    Tungsten Carbide Grades(Page)

    From the book Building Superior Brazed Tools  Buy the Book  There is no comprehensive comparison of tungsten carbide between and among tungsten carbide suppli

    Machine Coolant MSDS(Page)

     Material Safety Data Sheet  (There are a lot of really bad MSDS sheets.  If you are a manager you need an MSDS sheet that will protect you and your employees from hazards and that...

    CSM Brazing(Page)

    This operation actually consists of silver soldering and requires practice to become efficient at it. There are two generally accepted methods. One is to pre-tin the carbide tip by applying flux to...

    Saw Blade Resharpening(Page)

    Why Saw Blades Don’t Run The Same After Resharpening There are two principle reasons.  First, many saw blades are not sharpened properly.   Second, sharpening a saw blade means...

    How to Prevent Chipping and Get Cleaner Cuts (Using Scoring Blades)(Post)

    Chipping can easily ruin an otherwise perfect woodworking project. If you are struggling with tear-out at the bottom of your cuts, the solution lies in pairing your main table saw blade with a matchin

    Saw Tips in Oven Cleaner(Page)

    Executive Summary:  No effect was found on the carbide or the braze alloy.  Oven cleaner does remove any paint and the expensive plastic coatings which may be the best reason not to use it...

    Brazing with Propane(Page)

    Brazing Torch - 1300 F with a Bernzomatic Propane Torch  Here is the answer to whether you can braze with a propane / air torch.   You can but you have to control the environment so...

    Steel and Carbide tools(Post)

    How Tool Manufacturing and Materials Affect Quality The materials used and the processes tools go through during manufacturing play a crucial role in determining their quality. For steel or carbide to

    What Do You Get In A Quality Tool?(Post)

    The question “What do you get in a quality tool” came up on a forum today.   Somebody needed a new endmill and  was looking at two different endmills.  One end mill was higher quality, but cost four t

    Can Cleaners Harm Saw Blades(Page)

    Also See: Soaking Saw Tips in Oven Cleaner First, there are thousands of grades of carbide so discussing the properties of carbide is like discussing the properties of wood. Therefore, I...

    Books (Page)

    Books Available for Purchase

    Filtration Glossary continued g-m(Page)

    Machine Coolant Filtration Glossary Here is a glossary of Filtration Terms and their meanings.  Please refer to the Machine Coolant Filtration Index </

    Machine Coolant Filter Systems Annual Cost and Payback(Page)

    Adding Machine Coolant Filtration Systems in a Carbide Tool Grinding Operation A shop with six grinders for saws and tools bought six filter units for $9,000.  They bought an additional $600 in...

    Contaminants in Coolant(Page)

    Unfiltered Machine Coolant can have a lot of particles, bacteria and other contaminants in it.  Coming up with a Machine Coolant management  

    Inspecting Sharpened Saw Blades(Page)

    Everyone knows about the guy who shows up at your shop and promises you something “just as good” for “a lot less money”.   With cheap equipment, sloppy work and a lack of knowledge a “saw...

    CSM Side Grinding(Page)

    The side grinding of carbide saws is the most critical grinding operation as it relates to the saw's performance.  The angles ground in the side are not as important as the uniformity of the...

    Saw Blade Glossary(Page)

    Below is a compilation on common saw blade terms and their meanings. We also have many articles on Industrial Saw Blades in our Saw Blade Index. Alternate Top Bevel (ATB): (Carbide tipped circular...

    Machine Coolant Filter Units Cut Costs(Page)

    There are four simple steps to cutting costs.  These are proper settings, maintenance of equipment, proper air handling and proper machine coolant management.  Refer back to the

    Saw Blade Side Grinding(Page)

    by Lowell Freeborn The side grinding of carbide saws is the most critical grinding operation as it relates to the saw's performance.  The angles ground in the side are not as important as the...

!