Skip to main content

1160 results for 'push black'

Categories
Brands
Micro Jig
    Brazing Alloy Pushed Out of the Brazing Joint(Page)

    30x picture with our Proscope.   

    Brazing Flux(Page)

    Brazing Flux covers the area being brazed and keeps oxygen away from the materials. A good braze joint is both physically and chemically bound.  If oxygen gets in then the steel or carbide will...

    Brazing Tungsten Carbide(Page)

    I routinely get calls from people who are having trouble brazing carbide and don’t know why.  Brazing tungsten carbide is a very easy and reliable process if a few simple steps are taken but the...

    How Flux Affects Brazing(Page)

    Good & Bad Tips   

    Braze Failure(Page)

     Solutions to Brazing Problems (This is an overview article largely based on customer reports.  Most of this is covered in much greater depth with photographs in other articles and in...

    CSM Brazing(Page)

    This operation actually consists of silver soldering and requires practice to become efficient at it. There are two generally accepted methods. One is to pre-tin the carbide tip by applying flux to...

    CSM Side Grinding(Page)

    The side grinding of carbide saws is the most critical grinding operation as it relates to the saw's performance.  The angles ground in the side are not as important as the uniformity of the...

    Saw Blade Side Grinding(Page)

    by Lowell Freeborn The side grinding of carbide saws is the most critical grinding operation as it relates to the saw's performance.  The angles ground in the side are not as important as the...

    Brazing with Trimetal Shim(Page)

     Braze alloy / Copper / Braze alloy sandwiches   

    Brazing Process(Page)

    Definitions Brazing is the joining of two dissimilar materials using a third material.  brazing alloying and brazing are the same thing except the brazing alloying takes place below 840 F and...

    Brazing Ceramics with Standard Alloys(Page)

    Brazing Ceramics Simple, Cheap and Very Strong

    Holes in Braze Alloy(Page)

    The surface treatment on the carbide did not stick to the carbide.   There is the gray film on top of braze alloy. There are a great number of bubbles on the braze alloy which are probably...

    Types of Drill Bits(Page)

    With dozens of drill bit types and thousands of sizes to choose from we'll explain the differences and help you choose the right drill bit for your application. Anatomy of a drill bit:

    Brazing Carbide(Page)

    Buy Carbide Braze Alloy or Carbide Brazing Services  <

    Filtering EDM Fluid(Page)

    The most frequently overlooked factor in the EDM process is the filtration method used to maintain the dielectric fluid.  A typical tool and die operation had 12 EDM's, each with its own...

    Filter Changing Procedure(Page)

    Machine Coolant Filtration Units Filter Change ProcedureFor CP 2002 (incl. Wall Mount) & CP 2020

    How Carbide Powder is Pressed(Page)

    Tungsten carbide shapes are made from a powder which is typically tungsten, carbon, cobalt and wax to bind it all together.  Carbide shapes are made th

    Wood Allergens(Page)

    Here are 373 woods known to cause health problems.  Exposure to any wood dust can cause health problems.   Whether they affect someone and how badly the problems are depends on the...

    Bandsaw Blade Brazing(Page)

    Bandsaw (Band Saw) Blade Brazing   Clean and bevel the blade ends  Clamp blade en

    Bandsaw Blade Brazing(Post)

    Bandsaw (Band Saw) Blade Brazing Six Easy Steps Clean and bevel the blade ends  Clamp blade ends to the fixture Spread the flux Braze Anneal Remove excess alloy Size of Blade With a very small, nar

!