Loading... Please wait... |
Industrial Pliers from Wiha - Longer Lasting and a Better Cut Everytime. Guaranteed.
Linemans Pliers and Diagonal Cutters are engineered with Dynamic Joints; These joints are designed to take 40 percent less cutting force and significally increases tool life. With such a selection of high quality pliers from industry known, Wiha Tools, you will find the right plier for you and your application! |
| Description | Overall Length | Cutting Capacity | Part # | |
|---|---|---|---|---|
 |
Combination Linemans Pliers | 6.3" | 30901 | |
| 7" | 30903 | |||
| 8" | 30905 | |||
 |
Heavy Duty Combination Linemans Pliers | 8" | 30907 | |
| 9" | 30909 | |||
 |
Linemans Pliers with Wire Crimper | 9" | 30912 | |
 |
Long Nose Pliers with Cutter | 6.3" | 30911 | |
| 8" | 30913 | |||
 |
Bent Nose Pliers | 6.3" | 30915 | |
| 8" | 30917 | |||
 |
Flat Nosed Pliers | 6.3" | 30919 | |
 |
Round Nose Pliers | 6.3" | 30921 | |
 |
Diagonal Cutters | 5.5" | #6 AWG | 30923 |
| 6.3" | #6 AWG | 30925 | ||
| 7" | #6 AWG | 30927 | ||
 |
High Leverage Diagonal Cutters | 6.3" | #6 AWG | 30929 |
| 7" | #5 AWG | 30931 | ||
| 8" | #4 AWG | 30933 | ||
 |
Cable Cutters Multi-Strand | 6.3" | #0 AWG | 30926 |
| 8" | #00 AWG | 30928 | ||
 |
End Nippers | 8" | N/A | 30939 |
 |
Wire Stripper Pliers | #4 - #26 AWG | 30947 | |
 |
Push Button Water Pump Pliers | 10" | 30943 | |
 |
Slide Lock Adjustable Pliers | 10" | 32969 |
| # Pieces | Contents | Part # |
|---|---|---|
| 3 | 8" Linemans Pliers, 6.3" Long Nose Pliers, 6.3 inch Diagonal Cutter, Canvas Pouch | 30993 |
| 4 | 9" Linemans Pliers, 8" Long Nose Pliers, 8" Heavy Duty Diagonal Cutter, Wire Stripper, Canvas Pouch | 30990 |
| 8 | 6.3" Combo Pliers, 9" Linemans Pliers, 6" and 8" Long Nose Pliers, 5.5" Diagonal Cutters 8" Heavy Duty Cutter, 10" Adjustable Pliers, Wire Stripper, Canvas Pouch |
30998 |
| 18 | Combination Pliers, Adjustable Pliers, Long Nose Pliers, Diagonal Cutters Phillips: #1, #2, Slotted: 5/32, 1/4, Square: #1, #2, Torx: T15 ,20, 25 Inch Wrenches: 1/4x5/16, 3/8x7/16, 1/2x9/16, 5/8x11/16, 7/8x3/4 |
30991 |
New Products
All prices are in USD Copyright 2025 Carbide Processors. Sitemap | Website by oBundle
e, but the one adaptor allows me to use annual cutters in an older mag drill, several different drill presses and milling machines without having to own separate adaptors with shanks that match several morse taper sizes and R8 tooling. Read LessRead less about This is a well machined adaptor that
e Ridgid cast iron table and the Incra fence per the Incra directions. It all works really well. The set up took a little while but it’s sweet! I have done probably 50 cuts and each time I measure with a caliper and it’s dead on front to back on the board I am cutting. I think I am within .004 between blade and fence discrepancies. So for a Ridgid R4512 I’ll take it. Now I have a $1000 package that can hang in terms of accuracy with a nicer cabinet saw. Read LessRead less about So I added the TS-LS 32” to my
, the deal was too good to ignore and figured I would challenge any irregularities with the credit card company later. I also located a coupon code that made the price unbeatable. It must be stated, the expected delivery time on this particular unit was 6 weeks out, adding to my concern. This is the same time frame advised on the Incra web site as well. At probably 5 weeks, I was thrilled to receive delivery notice emails. The large unit came in pristine condition and packaged extremely well. I WILL NOT HESITATE TO BUY FROM CARBIDE PROCESSORS IN THE FUTURE. Thank you for the fantastic deal! Read LessRead less about I had been looking for several weeks
