Skip to main content

2840 results for 'brake point'

Categories
    Cobalt as a Carbide Binder(Page)

    Why Cobalt is the Prefered Binder Although nickel and various alloys are used in modern grades, cobalt is still most common. 

    Brazing Process(Page)

    Definitions Brazing is the joining of two dissimilar materials using a third material.  brazing alloying and brazing are the same thing except the brazing alloying takes place below 840 F and...

    Video Library(Page)

        Watch our informational videos on Brazing, Induction Brazing- heating carbide vs heating steel, Induction Brazing- melting braze on carbide, Fire Brick Saw,  What to...

    Bandsaw Blade Brazing(Page)

    Bandsaw (Band Saw) Blade Brazing   Clean and bevel the blade ends  Clamp blade en

    Getting Machine Coolant Where You Need It(Page)

    In a huge number of cases, maybe the majority, machine coolant is applied improperly.  Often a great amount of machine coolant is used improperly when much better results would be achieved...

    Machine Coolant Analysis(Page)

    Machine Coolant Filtration Case Studies  #1  Machine Shop Machine Coolant Analysis   End mill at 10x and four corners of the end mill at 60-x magnification. Analysis of a tool...

    Machine Coolant Filter Units Cut Costs(Page)

    There are four simple steps to cutting costs.  These are proper settings, maintenance of equipment, proper air handling and proper machine coolant management.  Refer back to the

    Bandsaw Blade Brazing(Post)

    Bandsaw (Band Saw) Blade Brazing Six Easy Steps Clean and bevel the blade ends  Clamp blade ends to the fixture Spread the flux Braze Anneal Remove excess alloy Size of Blade With a very small, nar

    CSM Hammering(Page)

    There are no mysteries involved in the act of hammering a saw.  However, you must know the basic principles and apply them conscientiously.  Saw hammering requires complete concentration on...

    Setting Band Saw Drift(Post)

    A topic that frequently sparks debate in woodworking circles is resawing with a band saw, particularly how to adjust the fence to compensate for band saw drift. Woodworkers often have strong opinions

    Carbide Wetting Tests(Page)

    From the book Building Superior Brazed Tools  Buy the Book Carbide Wetting Analysis Test #1<

    Saw Tip Grinds(Page)

    Saw Tip Configurations (also Styles or Grinds) The overall shape of a saw tip is called the "grind" because it is ground in after the tip is put on the saw body.     

    Special Brazing Projects(Page)

    You can have parts brazed whether they are simple torch brazing projects or extremely sensitive aerospace projects involving vacuum brazing.       <

    Allen Wrenches(Post)

    I found this old set of Allen wrenches. I’d forgotten I even owned it. I was rooting through some old tools looking for stuff to give my grandson Max for his fifth birthday.  These are genuine Allen w

    Hammering Saw Blades(Page)

    by Lowell Freeborn   There are no mysteries involved in the act of hammering a saw.  However, you must know the basic principles and apply them conscientiously.  Saw hammering...

    CSM Gumming(Page)

    Saw gumming is an operation that must be performed on all saws to be retipped.  It must be done accurately so the saw does not run out of balance and the tip recesses are all the same depth...

    Brazing Tungsten Carbide- Health and Safety(Page)

    Brazing Tungsten Carbide - Health and Safety From the book Building Superior Brazed Tools    Buy the Book

    Parts of a Saw Blade(Page)

      This is, at best, a brief overview of a modern precision saw blade.  It is designed to give at least some idea of the factors we take into consideration when designing a saw blade...

    CSM Saw Steel(Page)

    The steel in a saw blank must be high quality, machined, heat-treated and handled properly. There are two grades of steel most generally used in plates. These are plain carbon steel and nickel alloy...

    Gumming Saws(Page)

    by Lowell Freeborn Saw gumming is an operation that must be performed on all saws to be retipped.  It must be done accurately so the saw does not run out of balance and the tip recesses...

!