Skip to main content

296 results for 'brake alloi'

Categories
    Carbide Surface Treatment(Page)

    From the book Building Superior Brazed Tools   Buy the Book  

    Brazing Flux(Page)

    Brazing Flux covers the area being brazed and keeps oxygen away from the materials. A good braze joint is both physically and chemically bound.  If oxygen gets in then the steel or carbide will...

    Tungsten Carbide Automatic Brazing Standards(Page)

    Brazing Standards for Tungsten Carbide in Automatic Systems From the book Building Superior Brazed Tools  Buy the Book

    Saw Tip Breakage(Page)

    Saw Tip Breakage Drawings These drawings are not to be taken as absolutely accurate in all instances.  However they have been very helpful in the great majority of cases. 

    Saw Tips in Oven Cleaner(Page)

    Executive Summary:  No effect was found on the carbide or the braze alloy.  Oven cleaner does remove any paint and the expensive plastic coatings which may be the best reason not to use it...

    Technical Info(Page)

    We offer professional services in the following areas:  Woodworking Carbide Parts

    Brazing Process(Page)

    Definitions Brazing is the joining of two dissimilar materials using a third material.  brazing alloying and brazing are the same thing except the brazing alloying takes place below 840 F and...

    Cobalt as a Carbide Binder(Page)

    Why Cobalt is the Prefered Binder Although nickel and various alloys are used in modern grades, cobalt is still most common. 

    Bandsaw Blade Brazing(Page)

    Bandsaw (Band Saw) Blade Brazing   Clean and bevel the blade ends  Clamp blade en

    Bandsaw Blade Brazing(Post)

    Bandsaw (Band Saw) Blade Brazing Six Easy Steps Clean and bevel the blade ends  Clamp blade ends to the fixture Spread the flux Braze Anneal Remove excess alloy Size of Blade With a very small, nar

    Carbide Braze Failure Due To Machining Of the Steel Holder(Post)

    The Machining of the Steel Holders caused the braze joint to fail.  Below is an analysis of what happened. This project was the brazing of a rectangular blank into a steel holder for use as a scraper.

    Simple Solutions to Brazing Problems(Page)

    About 80 - 90% that these answers will solve these problems.  If you want more details you can go to our Braze Failure Analysis page.  Or buy the books.  You can also call 1-800...

    Circle Saw Calculator(Page)

    This utility will help you with industry standard calculation for your circle saws  

    Bad Surface and Gumming(Page)

       Chrome Plating Not Gummed Out of Notch   

    Welding Tungsten Carbide(Page)

    Weldable tungsten carbide is generally used to mean the joining of tungsten carbide to steel without the use of braze alloy.  Welding tungsten carbide may or may not be true welding.  This...

    Tool Tipping Materials(Page)

    Carbide & Other Tool Tipping Materials   From the book Building Superior Brazed Tools Buy the Book

    Chipping Tungsten Carbide(Page)

     From the book Building Superior Brazed Tools    Buy the Book  

    Brazing Tungsten Carbide- Health and Safety(Page)

    Brazing Tungsten Carbide - Health and Safety From the book Building Superior Brazed Tools    Buy the Book

    Carbide Wetting Tests(Page)

    From the book Building Superior Brazed Tools  Buy the Book Carbide Wetting Analysis Test #1<

    Cleaning Steel (Page)

    Cleaning Steel Before Brazing There are many differing opinions in this area. I recommend Easy Off Oven Cleaner for cleanliness test because it is easy, cheap, effective and everyone knows it is...

!