Used for mounting a variety of panel-style tables within TS rail system, such as existing router tables or shop-made extension tables. The four table support brackets (two front, two rear) are installed in the T-slots on the inner face of the TS rails. The support brackets are slotted to allow fine-tuning the table height, and they accommodate tables from 3/4in thick to 1-3/8in thick (or thicker by mortising the brackets into the bottom of the table).
Two steel stiffeners screw to the underside of the table to beef up the center section of the table as it is hung from the edges.

WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov