Skip to main content

5819 results for 'filter bit'

Categories
Brands
bormax-famag , Wera , Felo , Southeast Tool , Bondhus , Carbide Processors , Whiteside , HTC Tool , Chapman MFG , Incra , Wiha
    Catalogs(Page)

    Bessey Tools Catalog

    Machine Coolant Water Quality(Page)

    Water used in machine coolant mixtures should be made as pure as possible.  Contaminated water can contribute to bacteria growth in the Machine Coolant and can cause health problems for...

    Coolant Fluid Chip Separation(Page)

    Machine Coolant Fluid - Chip Separation  Every 100 lb of chips and turnings contains about two to four gallons of machine coolant.  The EPA estimates that approximately 90% of all the

    Types of Machine Coolant Disposal(Page)

    WARNING:  Do not take the following as being absolutely correct or as being all you need to know.   These were really good guidelines when I wrote them but laws change all the...

    Daily Machine Coolant Test(Page)

    You should do this once at the start of a shift and again at the end of a shift in a one-shift operation or once each shift in a three-shift operation.  You need to keep good records...

    Carbide Wetting Tests(Page)

    From the book Building Superior Brazed Tools  Buy the Book Carbide Wetting Analysis Test #1<

    Online Articles(Page)

    2-22-11 How to Save Money on Tools: 7 Useful Tips on How to Save Money While Tool Shopping

    About Us(Page)

    In 1981 we started working for Weyerhaeuser R&D helping them make better saw blades for less money.   As our technology developed and our reputation grew we acquired more and more...

    Brazing Tungsten Carbide(Page)

    I routinely get calls from people who are having trouble brazing carbide and don’t know why.  Brazing tungsten carbide is a very easy and reliable process if a few simple steps are taken but the...

    Saw Blade Sharpening(Page)

    Below are some saw blade sharpening articles from Lowell Freeborn's Carbide Saw Manual as well as articles we have written over the years.  For more articles on Saw Blades refer back to the...

    Brazing Carbide(Page)

    Buy Carbide Braze Alloy or Carbide Brazing Services  <

    Woodworking FAQ's(Page)

      1. What is the better buy- a Table Saw or a Radial Arm Saw? 2.  What is the best type of Dado Blade to Buy- The Dial (Wobble Type) or The Stacking (Chipper Type)?

    Making A Really Good Saw Blade(Page)

    A good saw blade is whatever the customer likes. Here is what I like: 1.  Personally I think the very best saw blades come from a very few, really top-end custom shops.  2.  In this...

    Why plywood needs special tools(Page)

    You quite often get better results with plywood when you use special tools, such as saw blades and router bits,  designed especially for plywood rather than tools deigned for wood.   In...

    Custom Carbide and Cermet Tools(Page)

    Tungsten Carbide and Cermet II Tools   We Sell Standard and Advanced Grades of Tungsten Carbide

    Calculating the Amount of Brazing Alloy to use(Page)

    Braze joints are strongest at about 0.0005” (1/2 of one –thousandth of an inch) but this is not a good standard for two main reasons: As the braze joint gets thicker it provides significant...

    Sample Coolant Analysis(Page)

    This program is an analysis of the machine coolant and sludge.  For most shops this is the only regulated waste they generate.  Ordinary office and business waste is generally not regulated...

    Bandsaw Blade Brazing(Post)

    Bandsaw (Band Saw) Blade Brazing Six Easy Steps Clean and bevel the blade ends  Clamp blade ends to the fixture Spread the flux Braze Anneal Remove excess alloy Size of Blade With a very small, nar

    Bandsaw Blade Brazing(Page)

    Bandsaw (Band Saw) Blade Brazing   Clean and bevel the blade ends  Clamp blade en

    How Carbide Powder is Pressed(Page)

    Tungsten carbide shapes are made from a powder which is typically tungsten, carbon, cobalt and wax to bind it all together.  Carbide shapes are made th

!