Loading... Please wait...
Watch our informational videos on Brazing, Induction Brazing- heating carbide vs heating steel, Induction Brazing- melting braze on carbide, Fire Brick Saw, What to look for when choosing Saw Plate, LongLife Saw Blades, and a really great Bandsaw Video (You will be amazed!).
Two short videos that show how to braze, with tips on how much flux and braze alloy to use.
Induction Brazing- Heating Carbide vs Heating Steel:
Instructive video where Tom uses Induction brazing to show the difference in how Carbide heats up and steel heats up. Tom points out the relevence of this experiment while offering some tips when brazing steel to carbide.
Induction Brazing- melting Braze on Carbide:
Instructive video where Tom uses an induction oven to demonstate how Braze alloy or silver solder melts onto carbide, and the importance of flux during this process.
coming soon
These highly durable Nickel Chrome blades are specially designed to cut porous insulating fire bricks. Unlike other saw blades, Fire Brick Saw Blades are made for cutting the a more abrasive and brittle material and wont dull or cause the bricks to crumble. Click here to order your Fire Brick Saw.
What to Look for When Choosing Saw Plate:
Saw Expert Cliff Gordon Explains what to look for when choosing a quality Saw Plate, and the differences each one may have.
Shop for Saw Plate from one of our three suppliers: Western Saw, Sonoma Saw, and Peerless.
This video is from Woodworkinginaction.com., a Video Magazine Company.
All prices are in USD Copyright 2025 Carbide Processors. Sitemap | Website by oBundle
e, but the one adaptor allows me to use annual cutters in an older mag drill, several different drill presses and milling machines without having to own separate adaptors with shanks that match several morse taper sizes and R8 tooling. Read LessRead less about This is a well machined adaptor that
e Ridgid cast iron table and the Incra fence per the Incra directions. It all works really well. The set up took a little while but it’s sweet! I have done probably 50 cuts and each time I measure with a caliper and it’s dead on front to back on the board I am cutting. I think I am within .004 between blade and fence discrepancies. So for a Ridgid R4512 I’ll take it. Now I have a $1000 package that can hang in terms of accuracy with a nicer cabinet saw. Read LessRead less about So I added the TS-LS 32” to my
, the deal was too good to ignore and figured I would challenge any irregularities with the credit card company later. I also located a coupon code that made the price unbeatable. It must be stated, the expected delivery time on this particular unit was 6 weeks out, adding to my concern. This is the same time frame advised on the Incra web site as well. At probably 5 weeks, I was thrilled to receive delivery notice emails. The large unit came in pristine condition and packaged extremely well. I WILL NOT HESITATE TO BUY FROM CARBIDE PROCESSORS IN THE FUTURE. Thank you for the fantastic deal! Read LessRead less about I had been looking for several weeks
