Woodpeckers PRP-BASIC-AI7518 - Router Table set, 24x32 Laminated with Aluminum Router Plate

This Router Table Package is for those who don't need a router lift and intend to use this mainly as a shaper table
Here's what you get with this package:

• AI7518 Router Plate - The 9-1/4 x 11-3/4 x 3/8" thick cast aluminum router plate comes pre-drilled for PC7518, PC7539, TRITON. The plate comes with 3 TwistLock rings with 1", 1-3/16" and 2-5/8" openings as well as a steel starting pin for freehand shaping and routing.

• SF-36SINGLE Single Offset Router Fence - This premium router table fence features a micro-adjustable offset up to 1/4" for accurate in-feed and out-feed alignment. The fence also features a dust collection port to fit 2-1/4 and 2-1/2” hose, variable throat capabilities to handle router bits up to 4” in diameter and multiple T-Slots on every surface. The T-Slots allow for quick and accurate attachment of sub-fences, feather boards and other attachments.

• RT2432-P Router Table Top - The 24 x 32 x 1-3/8" thick router table top is made from two layers of MDF with low friction micro-dot laminate on both the top and bottom, surrounded by a PVC edge band. A combination miter channel/T-track and two fence mounting tracks are embedded in the top. All three tracks are bolted in from underneath making them virtually impossible to pull out from clamping force.

• RTS2027 Router Table Stand - The stand is made from 14GA powder coated steel and allows your router table to be adjusted in height from 36" to 42". Two center braces provide even more support to the table surface.

*Router motor not included

WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov