Skip to main content

379 results for 'forc'

Did you mean: ford Refine Search
Categories
    Machine Coolant Analysis(Page)

    Machine Coolant Filtration Case Studies  #1  Machine Shop Machine Coolant Analysis   End mill at 10x and four corners of the end mill at 60-x magnification. Analysis of a tool...

    Brazing with Trimetal Shim(Page)

     Braze alloy / Copper / Braze alloy sandwiches   

    Chipping Tungsten Carbide(Page)

     From the book Building Superior Brazed Tools    Buy the Book  

    Cutting Frozen Lumber(Page)

    As wood freezes the water part becomes more important to the cutting. Cutting unfrozen wood is a matter of severing wood fibers. Cutting lightly frozen wood is a matter of cutting a slushy mix...

    Getting Machine Coolant Where You Need It(Page)

    In a huge number of cases, maybe the majority, machine coolant is applied improperly.  Often a great amount of machine coolant is used improperly when much better results would be achieved...

    Filtration Back Pressure(Page)

    A pump will generate a pressure or back pressure as it tries to pump material through a filter.  The pressure or back pressure is measured in psi. for pounds per square inch.  The finer the...

    How Fine to Filter Coolant(Page)

    Relationship Of Particle Size To Machining Tolerances   The machine coolant should be filtered to a particle level that is 10% of the tightest desired tolerance.  </

    Split Tips(Page)

    Split Tip Breakage Problem:  Tips are highly susceptible to breakage even during routine handling.  Executive Summary:  

    Particles in Machine Coolant(Page)

    Microscopic Particles Damage Tools In Precision Machining  Many machine shops remove the big chips from the machine coolant and consider it clean.  Very few shops adequately filter their...

    Pretin(Page)

    Pretin, Pretinning, or Tinning   Tinning, Pretinning or Pretin is applying

    CSM Carbide(Page)

    There are numerous large books written on carbide, but we intend to discuss those things that should be the most important to you. The carbide industry manufactures several hundred grades of...

    Carbide Defects(Page)

    Common Tungsten Carbide Defects From the book Building Superior Brazed Tools   

    Carbide Specification Checklist(Page)

    Tungsten Carbide Specification...

    Aluminum Cutting Saw Blades(Page)

     by Lowell Freeborn  The two major problems are galling or sticking of the aluminum to the saw blade, and sawing pieces of aluminum with improper clamping.  Refer to our 

    Saw Blade Glossary(Page)

    Below is a compilation on common saw blade terms and their meanings. We also have many articles on Industrial Saw Blades in our Saw Blade Index. Alternate Top Bevel (ATB): (Carbide tipped circular...

    How Carbide Powder is Pressed(Page)

    Tungsten carbide shapes are made from a powder which is typically tungsten, carbon, cobalt and wax to bind it all together.  Carbide shapes are made th

    Saw Tip Grinds(Page)

    Saw Tip Configurations (also Styles or Grinds) The overall shape of a saw tip is called the "grind" because it is ground in after the tip is put on the saw body.     

    Carbide Wetting Tests(Page)

    From the book Building Superior Brazed Tools  Buy the Book Carbide Wetting Analysis Test #1<

    Cracked Saw Tips on a Finished Saw Blade(Page)

    A customer wrote to us for an analysis on cracked saw tips on a finished saw blade.  We gave our analysis based on what we saw from the saw tips they sent us.  For more information on when...

    Brazing with Propane(Page)

    Brazing Torch - 1300 F with a Bernzomatic Propane Torch  Here is the answer to whether you can braze with a propane / air torch.   You can but you have to control the environment so...

!