CP 1000 - High performance, long life, low cost. A submersible pump drops in the sump and pumps though a bag filter. This gives very good filtering and very good filter life in light duty shops. Designed for use with manual equipment.

Shop for CP 1000

CP 2000 - Single pass, fine filtering. Optional sump for laser crystals, military, etc. This will work in very well in high capacity saw and tool shops but will need a filter change about every three days. Best with a separate sump where ultra fine polishing (think 2,000 grit) is needed.

CP 2002 - One-month filter life in saw shops. Best model for saw & tool shops. This unit is the result of seven years of constant development with the input of a couple hundred saw and tool operations from one man shops to major international manufacturers.

Shop for CP2002 for water based coolant

Shop for CP2002DB double bag for water based coolant

Shop for CP2002DB double bag for straight oil coolant

CP 2002–2 - Turn 2 valves and filter 2 sumps.  Makes it very easy to switch from one sump to the other by just switching two valves. Not good for filtering two sumps at the same time.

Shop for CP 2002-2

CP 2020 - 4 times filter life of 2002.  The CP 2020 has 6 times the capacity of the CP 2002) is solid, proven, hardworking, and has a huge capacity. The unit has a bag filter (typically 25 microns) followed by a cartridge filter (typically 5 microns). The unit can be configured as a parallel unit for polishing.

Shop for CP 2020 for Straight oil coolant

Shop for CP 2020 for water based coolant

CP 3000 - 3 filters.  Ultra clean filtering & long filter life.  The third filter serves as a polishing filter for ultra clean coolant.