**This item has been discontinued by the manufacturer. Please see JessEm Mast-R-Lift-II with INCRA MagnaLOCK Rings, Incra INCRA Mast-R-Lift II for a replacement.**

INCRA has teamed up with Woodpeckers, Inc. to introduce a custom version of one of our best sellers - Woodpecker's innovative Precision Router Lift V2 (PRL-V2).

The concept is like nothing else: To raise or lower the router quickly, the quick lifting tool disengages the lift's mechanism and the spring assist allows the heaviest routers to travel freely with very light effort and no cranking. The router's collet can be raised above the table for bit changes in two seconds! The quick adjuster provides the speed, and the tool-free micro adjust provides the finesse. After the router bit height is in the ballpark, no tools are necessary for fine tuning. A large thumbwheel embedded in the lift's top plate is instantly accessible for micro adjusting anywhere within a 3/8in range of travel. The travel indicator dial is graduated every .002in and can be reset to zero. A carriage brake is also available right next to the micro adjust thumbwheel for locking the carriage during extended cutting.

As with their custom JessEm Mast-R-Lift, the PRL-V2's top plate is a super flat Blanchard-ground casting that is machined to accept Incra's unique MagnaLOCK reducing ring system. The laser-cut steel rings are securely held in with powerful rare earth magnets for super fast ring changes, and a simple leveling system guarantees that the rings will snap in absolutely flush with the surrounding plate. The MagnaLOCK system is simply the most convenient, best performing reducing ring style available. Includes five reducing rings for great variety right out of the box: 3/8in, 1in, 1-5/8in, 2-5/8in, & 3-5/8in.

The PRL-V2's one-piece carriage comes equipped with one of three available sets of motor mounting pads. (Pads are interchangeable and may be ordered separately)

420 Motor Pads: Order the 420 pads to accept the 3hp motor from the Porter-Cable 7518 & 7519 fixed base routers.

414 Motor Pads: This version comes ready to accept the 3hp motor from the Milwaukee 5625 fixed base routers.

350 Motor Pads: Order the 350 pads to accept the 2hp motors from these routers:

• Porter-Cable 890-899 series
• Bosch 1617EVS & 1618
• Craftsman 17542, 17540, 28190.

Sorry, but INCRA Router Lifts are not compatible with plunge routers.

WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov