Loading... Please wait...
WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov- REVIEWS
- QUESTIONS
9 Reviews
Updating Results
Verified Reviewer
0.0 star rating
04/09/25
Review by Anonymous User
Gwolske
Verified Reviewer
5.0 star rating
02/18/21
Oshlun Laser
Review by Gwolske on 18 Feb 2021 review stating Oshlun Laser
This is my second time purchasing this laser. This one replaces the one I bought 10+ years ago, that finally conked out. I love it. The laser is very reliable, easy to install and simple to replace batteries. Very accurately indicates where the saw will cut on one side of the saw blade. It is an inexpensive upgrade that I recommend it to all. Carb...Read More
ide Processors was a pleasure to work with. Read Less
Duane E.
Verified Buyer
5.0 star rating
09/13/16
Worked as described.
Review by Duane E. on 13 Sep 2016 review stating Worked as described.
Worked as described.
Gary B.
Verified Buyer
5.0 star rating
12/24/24
I purchased a laser guide
Review by Gary B. on 24 Dec 2024 review stating I purchased a laser guide
I purchased a laser guide a few years ago. It works so well the purchase I just made was a Christmas gift for my son-in-law.
george k.
Verified Buyer
5.0 star rating
06/06/23
Works Flawlessly!
Review by george k. on 6 Jun 2023 review stating Works Flawlessly!
Works absolutely Great! I saw mixed reviews on You Tube, and hoped for the best, and was extremely happy with the purchase. Extremely happy with the laser!
Peter d.
Verified Buyer
5.0 star rating
12/07/21
Good value, that.
Review by Peter d. on 7 Dec 2021 review stating Good value, that.
Works as advertised!
Robert N.
Verified Reviewer
08/04/24
Q: How do I insert the batteries? My batteries fell out and I do not remember the polarity orientation. Thank you
Joe
Verified Reviewer
12/07/22
Q: Does the LGR
Does the LGRO1 Fit the Bosch GCM 12 SD ? If not which one of your products fit ?
Does the LGRO1 Fit the Bosch GCM 12 SD ? If not which one of your products fit ?
Carbide Processors
12/07/22
A: Hey there,
Please see the manufacturer's response below:
On the Bosch Model GCM12SD - 12" Dual-Bevel Glide Miter Saw, the inside arbor flange blade support can extend past the blade body to the point that our Item # LG-M01 - Miter Saw Laser Guide or LG-R01 - Radial Arm Saw Laser Guide cannot tighten down properly which will not allow you to use our laser guide with that particular saw.
One possible solution is to use a full kerf blade instead of a thin kerf blade on the machine, which in many cases will be enough of a difference to allow the laser to tighten down properly while still using the OEM inner blade flange. Some users have also decreased the thickness of the blade support on the OEM inner blade flange to allow the laser guide to fit properly, however this is not recommend by Oshlun.
Ultimately, the laser guide needs to sit flush against the blade in order to tighten down completely and allow for proper and safe usage.
Thank you!
Please see the manufacturer's response below:
On the Bosch Model GCM12SD - 12" Dual-Bevel Glide Miter Saw, the inside arbor flange blade support can extend past the blade body to the point that our Item # LG-M01 - Miter Saw Laser Guide or LG-R01 - Radial Arm Saw Laser Guide cannot tighten down properly which will not allow you to use our laser guide with that particular saw.
One possible solution is to use a full kerf blade instead of a thin kerf blade on the machine, which in many cases will be enough of a difference to allow the laser to tighten down properly while still using the OEM inner blade flange. Some users have also decreased the thickness of the blade support on the OEM inner blade flange to allow the laser guide to fit properly, however this is not recommend by Oshlun.
Ultimately, the laser guide needs to sit flush against the blade in order to tighten down completely and allow for proper and safe usage.
Thank you!
Rick
Verified Reviewer
11/29/22
Q: Does it work on DeWalt DWS 715 saw?
Carbide Processors
11/30/22
A: Hey there!
Please see the manufacturer's response below:
Our Item #LG-M01 - Miter Saw Laser Guide should fit the DEWALT Model # DWS715 - 12" Single Bevel Compound Miter Saw.
In general the Miter Saw Laser Guide fits most miter saws, however it will not fit machines that have interlocking arbor flanges, where the inside arbor flange extends past the blade body when the blade is mounted on the machine, or machines that have an inner flange blade support that protrudes past the blade body. Both of these issues are usually only found on 12 inch machines and do not allow the laser guide to sit flush against the blade and tighten down properly.
After reviewing the parts breakdown for your machine, we did not see any issues, however please check your machines prior to ordering to ensure the above potential issues do not exist.
Thank you!
Please see the manufacturer's response below:
Our Item #LG-M01 - Miter Saw Laser Guide should fit the DEWALT Model # DWS715 - 12" Single Bevel Compound Miter Saw.
In general the Miter Saw Laser Guide fits most miter saws, however it will not fit machines that have interlocking arbor flanges, where the inside arbor flange extends past the blade body when the blade is mounted on the machine, or machines that have an inner flange blade support that protrudes past the blade body. Both of these issues are usually only found on 12 inch machines and do not allow the laser guide to sit flush against the blade and tighten down properly.
After reviewing the parts breakdown for your machine, we did not see any issues, however please check your machines prior to ordering to ensure the above potential issues do not exist.
Thank you!
Rofra
Verified Reviewer
02/06/21
Q: Will this work on a Ryobi TS 1341 10 inch Compound Miter Saw?
Carbide Processors
02/08/21
A: Please give the manufacturer a call (Oshlun, 702 294 1231) and one of their techs would be perfectly suited to confirm or offer an alternative if available.
Feel free to reach out to us at info@carbideprocessors.com if you have any questions about ordering or if there is anything else that we can do for you.
Thank you!
Feel free to reach out to us at info@carbideprocessors.com if you have any questions about ordering or if there is anything else that we can do for you.
Thank you!
Gerry
Verified Reviewer
11/11/17
Q: I have a new dewalt dws779. will this laser work with this saw.
Carbide Processors
11/21/17
A: Hello,
That laser guide should work, the only thing you need to make sure is that the interflange is not sticking out and the clamp is tight against the saw blade.
That laser guide should work, the only thing you need to make sure is that the interflange is not sticking out and the clamp is tight against the saw blade.
Thank you!