Oshlun SBF-054050 - 5-3/8" 50 Tooth FTG Saw Blade with 20mm Arbor (5/8" and 10mm Bushings) for Thin Mild Steel and Ferrous Metals

Oshlun's ferrous metal blades have been designed with a durable carbide grade and special tooth grind which ensures an extended cutting life of all types of thin ferrous metals and mild steel, such as steel studs, sheet metal, conduit, and more. They can also be used for cutting non ferrous metals such as aluminum, copper and brass. The specially formulated C-6 micro grain carbide with titanium lasts longer and leaves a burr free cut with little to no sparks or dust, which are common when using abrasives. They can cut 5 to 10 times faster and last up to 30 times longer than abrasives, allowing fewer blade changes and increased production. The higher tooth count blades are better suited for thinner materials, while the lower tooth count blades are better for thicker materials.

Warning: Not recommended for cutting hardened materials or stainless steel. Never use on saws that run above the rated MAX RPM. Proper clamping devices should be employed.

WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov