Loading... Please wait...Felo insert and power bit sets are available in black industrial finish, TiN coated or diamond coated to suit your application. Most insert bit sets include a bit holder for use in power tools.
AllStar Bit BoxIncludes 10 bits and Felo Star screw holding bit holder
|
|
| Bits Included | Part # |
|---|---|
| Slotted 7/32", 1/4" | Phillips (3x) 2. 3 | Torx 20, 25, 30, 40 | 53525 |
| Torx (4x) 20, (2x) 25, 27, (2x) 30, 40 | 50797 |
| TiN Slotted 7/32". 1/4" | Phillips (3x) 2. 3 | Torx 20, 25, 30, 40 | 53527 |
| Slotted 7/32", 1/4" | Phillips (3x) 2. 3 | Square 2, 3 | Torx 20, 25 | 53015 |
| Slotted 7/32", 1/4" | Phillips (3x) 2. 3 | Square (2x) 2, (2x) 3 | 53529 |
| Slotted 7/32", 1/4" | Phillips 2. 3 | Square 2, 3 | Torx 20, 25, 30, 40 | 52755 |
Swift Box Bit SetsIncludes 6 bits and magnetic bit holder |
  |
| Bits Included | Part # |
|---|---|
| TiN Torx 10, 15, 20, 25, 30, 40 | 51389 |
| TiN Torx 10, 15, 20 | TiN Phillips 1, 2, 3 | 51925 |
| Torx 10, 15, 20, 25, 30, 40 | 51395 |
| Security Torx 10, 15, 20, 25, 30, 40 | 61669 |
| Slotted7/32", 1/4" | Torx 10, 20 | Phillips 1, 2 | 51923 |
| Slotted7/32", 1/4" | Square 1, 2 | Phillips 1, 2 | 53535 |
Profi Bit BoxIncludes magnetic bit holder |
 |
| Bits Included | Part # |
|---|---|
| Slotted 3/16", 7/32", 1/4", 5/16" | Phillips 1, (2x) 2, 3 | Torx 15, (2x) 20, 25 | 53541 |
| Slotted 9/64", 5/32", 3/16", 7/32", 1/4", 5/16" | 31410 |
| Torx 10, 15, 20, 25, 30, 40 | 31419 |
Bit BoxesIncludes 25 bits and magnetic bit holder |
 |
| Bits Included | Part # |
|---|---|
| Phillips (5x) 1, (15x) 2, (5x) 3 | 53543 |
| Torx 5, (2x) 6, 8, 9, (2x) 10, (3x) 15, (4x) 20, (4x) 25, 27, (3x) 30, (3x) 40 | 50803 |
| XZN M6, M5, M4 | TorqSet 0, 4, 6, 8, 10 | Security Torx 10, 15, 20, 25, 30 | Tri-Wing 1, 2, 3, 4, 5 | Spanner 6, 8, 10 | Clutch 5/32", 1/4" | 51565 |
Magnetic Nut Setters2 3/8" long x 1/4" drive |
  |
| Hex Size | Part # |
|---|---|
| 5 mm | 50404 |
| 6 mm | 50406 |
| 7 mm | 51373 |
| 8 mm | 50408 |
| 10 mm | 50410 |
| 5/16" | 50414 |
| 3/8" | 50416 |
| Style | Length | Shank | Bit Size | Part # | |
|---|---|---|---|---|---|
 |
Felo Star | 2 3/4" | 1/4" | 1/4" | 52673 |
 |
Indenter Bitholder | max. 3 1/8" | 1/4" | 1/4" | 51897 |
 |
Magnetholder extra strong | 1 7/8" | 1/4" | 1/4" | 30850 |
| Magnetholder | 2 1/4" | 1/4" | 1/4" | 30340 | |
 |
Magnetholder | 4" | SDS | 1/4" | 30978 |
 |
Socket Adapter | 2" | 1/4" | 1/4" Sq Drive | 30481 |
 |
Adapter | 1" | N/A | 1/4" | 30851 |
 |
Socket Adapter | 2" | 1/4" | 3/8" Sq Drive | 30489 |
All prices are in USD Copyright 2025 Carbide Processors. Sitemap | Website by oBundle
e, but the one adaptor allows me to use annual cutters in an older mag drill, several different drill presses and milling machines without having to own separate adaptors with shanks that match several morse taper sizes and R8 tooling. Read LessRead less about This is a well machined adaptor that
e Ridgid cast iron table and the Incra fence per the Incra directions. It all works really well. The set up took a little while but it’s sweet! I have done probably 50 cuts and each time I measure with a caliper and it’s dead on front to back on the board I am cutting. I think I am within .004 between blade and fence discrepancies. So for a Ridgid R4512 I’ll take it. Now I have a $1000 package that can hang in terms of accuracy with a nicer cabinet saw. Read LessRead less about So I added the TS-LS 32” to my
, the deal was too good to ignore and figured I would challenge any irregularities with the credit card company later. I also located a coupon code that made the price unbeatable. It must be stated, the expected delivery time on this particular unit was 6 weeks out, adding to my concern. This is the same time frame advised on the Incra web site as well. At probably 5 weeks, I was thrilled to receive delivery notice emails. The large unit came in pristine condition and packaged extremely well. I WILL NOT HESITATE TO BUY FROM CARBIDE PROCESSORS IN THE FUTURE. Thank you for the fantastic deal! Read LessRead less about I had been looking for several weeks
