Bessey Lever Clamp's quick action and vibration resistance make them a must have in any shop. Bessey's light duty lever clamps are ideal for woodworking and are all manufactured to Bessey's high standards for quality and durability. Choose from the classicly desigined Lever clamp, or one of Bessey' KliKlamps. For more delicate work, try the Klemmy Clamps which feature wooden arms and cork pads making them ideal for delicate tasks.
Clamping Capacity | Throat Depth | Clamping Force | Approx. Weight | sku |
---|---|---|---|---|
4" | 2 3/8" | 400 lbs | 1.1 lbs | LC4 |
8" | 4" | 660 lbs | 2.5 lbs | LC8 |
12" | 5 1/2" | 1200 lbs | 5 lbs | LC12 |
20" | 4 3/4" | 1200 lbs | 5.75 lbs | LC20 |
31" | 4 3/4" | 1200 lbs | 7.9 lbs | LC31 |
Quick, Rapid Action Lever Clamps
Clamping Capacity | Throat Depth | Clamping Force | Approx. Weight | sku |
---|---|---|---|---|
4" | 2 3/8" | 400 lbs | 1.1 lbs | GSH12 |
8" | 4" | 600 lbs | 2.5 lbs | GSH20 |
12" | 5 1/2" | 1110 lbs | 5 lbs | GSH30 |
20" | 4 3/4" | 1110 lbs | 6.25 lbs | GSH50 |
Clamping Capacity | Throat Depth | Clamping Force | Pkg. Qty. | Approx. Weight | sku |
---|---|---|---|---|---|
4" | 3" | 260 lbs | 2 | 0.7 lbs | KLI3.004-SET |
8" | 3" | 260 lbs | 2 | 0.8 lbs | KLI3.008-SET |
12" | 3" | 260 lbs | 2 | 1 lbs | KLI3.012-SET |
16" | 3" | 260 lbs | 2 | 1.2 lbs | KLI3.016-SET |
Clamping Capacity | Throat Depth | Clamping Force | Approx. Weight | sku |
---|---|---|---|---|
4" | 3" | 260 lbs | 0.7 lbs | KLI3.004 |
8" | 3" | 260 lbs | 0.8 lbs | KLI3.008 |
12" | 3" | 260 lbs | 1 lbs | KLI3.012 |
16" | 3" | 260 lbs | 1.2 lbs | KLI3.016 |
All prices are in USD Copyright 2025 Carbide Processors. Sitemap | Website by oBundle
e, but the one adaptor allows me to use annual cutters in an older mag drill, several different drill presses and milling machines without having to own separate adaptors with shanks that match several morse taper sizes and R8 tooling. Read LessRead less about This is a well machined adaptor that
e Ridgid cast iron table and the Incra fence per the Incra directions. It all works really well. The set up took a little while but it’s sweet! I have done probably 50 cuts and each time I measure with a caliper and it’s dead on front to back on the board I am cutting. I think I am within .004 between blade and fence discrepancies. So for a Ridgid R4512 I’ll take it. Now I have a $1000 package that can hang in terms of accuracy with a nicer cabinet saw. Read LessRead less about So I added the TS-LS 32” to my
, the deal was too good to ignore and figured I would challenge any irregularities with the credit card company later. I also located a coupon code that made the price unbeatable. It must be stated, the expected delivery time on this particular unit was 6 weeks out, adding to my concern. This is the same time frame advised on the Incra web site as well. At probably 5 weeks, I was thrilled to receive delivery notice emails. The large unit came in pristine condition and packaged extremely well. I WILL NOT HESITATE TO BUY FROM CARBIDE PROCESSORS IN THE FUTURE. Thank you for the fantastic deal! Read LessRead less about I had been looking for several weeks