The Bessey ClassiX line is a compact range of the most popular clamping features in a variety of throat depths and clamping capacitys to meet the needs for proffessionals in real-world applications. Enjoy High value at a lower price with Bessey's ClassiX metalworking clamps. For incredible clamping power, durabiity and strength, nothing beats a Bessey.
Clamping Capacity | Throat Depth | Clamping Force | Approx. Weight | sku |
---|---|---|---|---|
4" | 3 1/8" | 550 lbs | 0.5 lbs | GS12-8K |
6" | 3 1/8" | 550 lbs | 0.6 lbs | GS16K |
8" | 4" | 880 lbs | 1.8 lbs | GS20K |
6" | 4 3/4" | 1000 lbs | 2 lbs | GS16-12K |
10" | 4 3/4" | 1000 lbs | 2.5 lbs | GS25K |
12" | 5 1/2" | 1200 lbs | 4.3 lbs | GS30K |
24" | 4 3/4" | 1200 lbs | 5.10 lbs | GS60K |
Designed for heavier applications.
Clamping Capacity | Throat Depth | Clamping Force | Approx. Weight | sku |
---|---|---|---|---|
12" | 4 3/4" | 1880 lbs | 5 lbs | GSL30 |
24" | 4 3/4" | 1880 lbs | 6.5 lbs | GSL60 |
7 1/2" | 4 3/4" | 2660 lbs | 5.2 lbs | GSM20 |
9" | 5 1/2" | 2660 lbs | 6 lbs | GSM25 |
12" | 5 1/2" | 2660 lbs | 7 lbs | GSM30 |
16" | 5 1/2" | 2660 lbs | 7.5 lbs | GSM40 |
20" | 5 1/2" | 2660 lbs | 7.7 lbs | GSM50 |
24" | 5 1/2" | 2660 lbs | 8 lbs | GSM60 |
Quick, Rapid Action Lever Clamps
Clamping Capacity | Throat Depth | Clamping Force | Approx. Weight | sku |
---|---|---|---|---|
4" | 2 3/8" | 400 lbs | 1.1 lbs | GSH12 |
8" | 4" | 600 lbs | 2.5 lbs | GSH20 |
12" | 5 1/2" | 1110 lbs | 5 lbs | GSH30 |
20" | 4 3/4" | 1110 lbs | 6.25 lbs | GSH50 |
All prices are in USD Copyright 2025 Carbide Processors. Sitemap | Website by oBundle
e, but the one adaptor allows me to use annual cutters in an older mag drill, several different drill presses and milling machines without having to own separate adaptors with shanks that match several morse taper sizes and R8 tooling. Read LessRead less about This is a well machined adaptor that
e Ridgid cast iron table and the Incra fence per the Incra directions. It all works really well. The set up took a little while but it’s sweet! I have done probably 50 cuts and each time I measure with a caliper and it’s dead on front to back on the board I am cutting. I think I am within .004 between blade and fence discrepancies. So for a Ridgid R4512 I’ll take it. Now I have a $1000 package that can hang in terms of accuracy with a nicer cabinet saw. Read LessRead less about So I added the TS-LS 32” to my
, the deal was too good to ignore and figured I would challenge any irregularities with the credit card company later. I also located a coupon code that made the price unbeatable. It must be stated, the expected delivery time on this particular unit was 6 weeks out, adding to my concern. This is the same time frame advised on the Incra web site as well. At probably 5 weeks, I was thrilled to receive delivery notice emails. The large unit came in pristine condition and packaged extremely well. I WILL NOT HESITATE TO BUY FROM CARBIDE PROCESSORS IN THE FUTURE. Thank you for the fantastic deal! Read LessRead less about I had been looking for several weeks