Bing
Ajax  Loading... Please wait...

Popular Brands

Our Newsletter

  • Removing Cobalt (Web Page)

    Removing Cobalt (free & chelated)  From Saw   Grinding Coolant Removes 11.5 grams / Liter (1.6 oz. / gal.)    We received one liter of coolant that the saw mill said ...

  • CSM Saw Terms and Ordering Information (Web Page)

    TO ORDER A STANDARD SAW: Specify 1) Diameter, 2) Eye Size, 3) Number of teeth, 4) Catalogue style and number if available.  State side clearance, dish angle, and back angle. EXAMPLE: Si ...

  • Types of Drill Bits (Web Page)

    With dozens of drill bit types and thousands of sizes to choose from we'll explain the differences and help you choose the right drill bit for your application. Anatomy of a drill bit: Material ...

  • Brazing Tungsten Carbide in a Notch (Web Page)

    Method #1 is the most common. Method #2 is easiest, cheapest, most reliable and generally works best.  Method #3 can give a little advantage but that is rarely needed in this kind of an applicat ...

  • Machine Coolant Analysis (Web Page)

    Machine Coolant Filtration Case Studies   #1  Machine Shop Machine Coolant Analysis   End mill at 10x and four corners of the end mill at 60-x magnification. Analysis of a too ...

  • Shipping (Web Page)

    Our shipping policy We can ship most orders internationally. Note that there are restrictions on some products, and some international destinations (please see the International Orders sec ...

  • Machine Coolant Testing Methods (Web Page)

    Run these tests daily at first.  Once you get the system under control you shouldn't see much change from day to day. Then run the tests weekly. How and When to Test machine coolant - Outs ...

  • How Fine to Filter Coolant (Web Page)

    Relationship Of Particle Size To Machining Tolerances   The machine coolant should be filtered to a particle level that is 10% of the tightest desired tolerance.   If the top line is 0.

  • Tool Tipping Materials continued (Web Page)

    Tool Tipping Materials (continued) Return to Previous page    List of materials Steel Tool Steel (High-speed steel) Cutting / hardfacing alloys with WC (Talonite +WC) Tungsten ca ...

  • CSM Chip Breaker Style (Web Page)

    SERVICE SPECIFICATIONS: Standard 10° Hook All Teeth Same Diameter All Corner Chamfers 30° Sides 1° & 2° USE: These tooth styles are used mainly for cutting metals such as a ...

  • Grinding Carbide- Health and safety risks (Web Page)

     From the book Building Superior Brazed Tools     Buy the Book Contents The Metals Explanation for Non-scientists Air Collection Information and Equipment Hardme ...

  • Excessive Machine Coolant Use (Web Page)

    Excessive machine coolant loss seems to be due to overuse, splashing or changing it too often.  Take a look at some of our other Articles on Machine Coolant in our Coolant filtration Index. 1.& ...

  • CSM Controlled Chip Metal Style (Web Page)

    SERVICE SPECIFICATIONS: Hook 10° Top of Carbide is .008" Above Steel Sides 1° & 2° USE: This is a very rugged design for non-ferrous metal cutting.  The teeth protrude sli ...

  • CSM Planer Combination Style (Web Page)

    4 TOOTH AND RAKER COMBINATION SERVICE SPECIFICATIONS: Hook 15° 4 Teeth 25° A. T. B. 1 Tooth Raker .015 Lower Sides 2° and 3° USE: This is one of the oldest style carbide saws ...

  • Cleaning Saw Blades (Web Page)

    Cleaning Saw Blades, Router Bits, & other Carbide Tools  It is important you clean saw blades and other carbide tools regularly as pitch, glues and other materials can build up and severely ...

  • Special Brazing Projects (Web Page)

    You can have parts brazed whether they are simple torch brazing projects or extremely sensitive aerospace projects involving vacuum brazing.       Here are two projects we did ...

  • Calculating the Amount of Brazing Alloy to use (Web Page)

    Braze joints are strongest at about 0.0005” (1/2 of one –thousandth of an inch) but this is not a good standard for two main reasons: As the braze joint gets thicker it provides signi ...

  • Filter Changing Procedure (Web Page)

    Machine Coolant Filtration Units Filter Change ProcedureFor CP 2002 (incl. Wall Mount) & CP 2020   Below are step by step procedure for changing the filter on our CP 2020 and CP 2002 Mac ...

  • Cermet II Saw Blades in Industrial Applications (Web Page)

    Cermet II Saw Tips have been used to solve many customer problems and increase cutting speed and wear resistance.  See some of the reviews customers have given the Cermet II Saw Blades ...

  • Tungsten Carbide Properties (Web Page)

    From the book Building Superior Brazed Tools     Buy the Book  The following is a list of Tungsten Carbide Properties.  Different Grades of Tungsten Carbide will differ in S ...



Your search for "woodpecker toolsjavascript:void(0)/?_=1" did not match any news or information.

Suggestions:

  • Make sure all words are spelled correctly.
  • Try different keywords.
  • Try more general keywords.